Superior portability,flexibility
and performance.
Bio-Med Devices'new,industry-leading Crossvent 3+ Ventilator offers a wide range of ventilatory
support for both pediatric and adult patients in a variety of settings from air and ground transport
to emergency department to ICU to subacute care and more.
A choice of configurations
You can order the Crossvent 3+
in any one of three configurations:standard,with Bio-Med
Devices Air/Oxygen Blender
attached,or with air entrainment.The attached blender
allows the user to set oxygen
concentration from 21% to
100%.Units with air entrainment can deliver either 100%
oxygen or a nominal 50% oxygen without the need for an
external air supply source.The
unique venturi mechanism built
into the unit increases oxygen
tank life by mixing ambient air
with the source oxygen.
A range of modes
and alarms
Using the color touchscreen
display,operators can easily
select the appropriate
ventilation mode:Assist
Control,SIMV,CPAP,Pressure
Support or Sigh.Available
alarms includeexhaled tidal
volume,PIP,PEEP,mean
pressure,low supply pressure,
rate,oxygen concentration and low battery.
Dependable power
The Crossvent 3+ can be
powered by a compressor,
blended gas or 100% oxygen,
and its consumption of gas is
extremely low.The internal
battery provides power during
transport and in the event
of AC power failure.If the
external power should fail,the
unit will automatically switch to
its battery power and sound an
alarm.A fully charged battery
will last approximately 6 hours.
Highlights of enhancements
• Color display with greater visibility and viewing angle
• Improved touchscreen sensitivity
• Improved battery gauge providing greater accuracy in 2% increments
• Optional Exhaled VT
• Optional Exhaled VE
Key features include
• Ultra-compact and lightweight design
• Unmatched gas efficiency
• Long battery life
• Multiple ventilation modes
• Built-in PEEP
• LED power indicator
• Foolproof circuit connections
Ideal for
• Air and ground transport
• Intra- or inter-hospital
transport
• Intensive care unit
• Emergency department
• Recovery room
• Subacute care
Specifications
| Parameter |
Range |
| Rate |
5-150 bpm |
| Tidal Volume |
5-2500 ml |
| Inspiratory Time |
0.10 – 3.0 seconds |
| I/E Ratio |
3:1 to 1:99 |
| Flow Rate |
1-120 lpm |
| Peak Pressure |
0-120 cmH2O |
| PEEP Pressure |
0-35 cmH2O |
| Pressure Trigger |
-.2 to –10 cmH2O |
| Pressure Support |
0-50 cmH2O |
| SIMV Rate |
0.6-50 bpm |
| O2 Sensor |
21-100% |
| Sigh |
0-2500 ml |
Ventilation Modes
Assist Control | SIMV
CPAP | Pressure Support | Sigh
Monitors/Alarms
Standard
Peak Pressure | Rate | Oxygen
PEEP/CPAP | Mean Pressure
Low Battery | Low Supply Pressure
Options
Blender or Air Entrainment
Exhaled Tidal Volume
Exhaled Minute Volume
Physical Characteristics
Size:11”x 10”x 5.5”
(28 cm x 25.4 cm x 14 cm)
Weight:10.5 lbs.
(4.8 kg)
Models
3300CBasic CROSSVENT 3+
3300ACCrossvent 3+ with Air Entrainment
3300BCCrossvent 3+ with attached Air/Oxygen Blender
3300ECCrossvent 3+ with Exhaled Tidal Volume Monitoring
3300AECCrossvent 3+ with Exhaled Tidal Volume Monitoring
& Air Entrainment
3300BECCrossvent 3+ with Exhaled Tidal Volume Monitoring
& attached Air/Oxygen Blender
All Models Include
Disposable Adult Circuit Adult Test Lung
O2 High Pressure Supply HoseExternal Power Supply
Oxygen Sensor Cell w/cable Instruction/Service
Optional Accessories
Heavy Duty Roll Stand Circuit Support Arm
(includes tilt bracket)Support Arm Bracket
Filter Water Trap (Air) Blender Pole Bracket
Filter Water Trap (O2) Disposable Pediatric Circuit
Pediatric/Adult Pneumotach Reusable Adult Circuit
Standard Pole Mount Bracket |
